Easy To Install Water Filter For New Constructions
When building a new house it is important to protect the plumbing system and all the fixtures, appliances such as dishwasher, ice maker, washing machine and hot water heater. Not to mention your personal well being. If you were thinking about reverse osmosis you will need to build an extra room for the holding tanks not to mention it takes three gallons to make one gallon of clean water the water bill will be high. It also makes the water very aggressive. It takes every thing out of the water so the water attacks your pipes and fixtures trying to get it back which will damage your plumbing system. The AquaOx will fit about any where a small closet, in the crawl space, the basement in a corner or beside the hot water heater. The installation is very simple connect the main water line to the inlet and connect the line leading in to the house to the outlet connect a pvc line to the backwash outlet plug it in to a regular power outlet and you are done. It will remove the bad stuff from the water and leave the good stuff and it is virtually maintenance free. The only thing you would need to do is make sure the backwash timer time clock is set to the correct time if the power was to go out. It will last the average family better than ten years or 1.2 million gallons.
AquaOx is the top of the line water filter. Only the best media on the market is used in an AquaOx in quantities that exceed the contact time for removing contaminants. This state of the art water system will protect your family and fixtures for many years.