The plumbing valve is a device that controls flow in a pipe. It can be used to control the flow of water, sewage, or other liquids. Plumbing valves are particularly important when installing pipes that will go through walls or beneath floors. If you don’t choose the right plumbing valve for your project, you may end up with damaged parts or leaks later on down the line!
What Is a Plumbing Valve?
A plumbing valve is a device that controls the flow of liquids and gases. They come in many different shapes and sizes, but they all serve one purpose: to allow or restrict flow through pipes. For example, valves are used in fire sprinkler systems to control water pressure; faucets control how much water comes out of them; showerheads adjust how much hot or cold water flows out of them (and vice versa); and toilets stop up when you flush so no toilet paper goes down into the sewer system!
There are many different types of valves, including gate valves and globe valves. Gate valves have a handle that opens or closes it; globe valves have a handle that turns to open or close them. Valves can also be used for water pressure systems, such as sprinkler systems in homes and businesses. They control how much water flows through the pipes so that you don’t get too much pressure from the system when using it.
Types of Plumbing Valves
There are many types of plumbing valves, each with its own purpose. Here’s a breakdown of the most common types:
- Ball Valves
These are used when you want to control the flow of fluid through a pipe or hose by opening or closing it. They have a ball inside that can be moved up and down within the valve body, allowing you to regulate how much pressure is allowed into your line. Most ball valves use two levers (called “levers”) that can be operated one after another using hand pressure or cable mechanisms; this allows you to choose between full open (no restriction) versus fully closed (total blockage).
- Gate Valves
Gate valves operate similarly as ball valves but instead use a lever instead of camming action for movement within their bodies. They’re commonly found on water lines where there might need to be different flows depending on whether they’re coming from upstream or downstream sources—and they’re also great for regulating other liquids like steam and oil!
Gate valves are also used in conjunction with other types of valves, such as check valves and ball valves.
Globe Valves
Globe valves are another popular type of valve that can be found in many applications. They’re typically used when there’s a need to control the flow of gases and liquids through pipelines because they have a solid disk on their exterior surface that rotates inside a frame; when it’s turned, this opens and closes the pathway as needed.
They’re also a great option for controlling the flow of chemicals, steam and water in industrial facilities—and they’re often used in conjunction with other types of valves such as gate valves.
Saddle Valves
Saddle valves are another popular option for controlling the flow of gases and liquids in industrial settings. They’re typically used when there’s a need to control the flow of chemicals, steam and water in industrial facilities—and they’re often used in conjunction with other types of valves such as globe valves.
Saddle valves have a flat surface that acts as a barrier for controlling the flow of gases and liquids; when it’s turned, this opens and closes the pathway as needed. They’re also a great option for controlling the flow of chemicals, steam and water in industrial facilities—and they’re often used in conjunction with other types of valves such as gate valves.
Why Choosing the Right Plumbing Valve Is Important
If you’re like most people, you know that having a plumbing valve installed can be a huge pain in the butt. But what exactly is going on inside those little plastic pieces?
According to the National Association of Plumbing-Heating-Cooling Contractors (NAPHCC), there are several reasons why choosing the right plumbing valve is important:
Avoid leaks
A leaky valve will cost your home more money than just replacing it outright. Replacing an entire pipe or fixture could mean paying for unnecessary repairs and downtime from water damage caused by clogs and other problems associated with them.
Avoid damage to pipes
If something goes wrong with your pipes because someone didn’t install their own valves correctly, then all kinds of problems could arise down the road.
Avoid damage to walls or ceilings
You don’t want anything falling on top of those expensive fixtures!
When selecting a plumbing valve, it’s important to choose the right type for the job to avoid damage to walls or ceilings. Many valves, such as ball valves and gate valves, use levers that can be operated one after another to allow for full open (no restriction) or fully closed (total blockage).
Saving money
Having a plumber install and test your plumbing valves can help you save money. The NAPHCC says that leaks cost Americans $1.7 billion each year, so stopping them before they start can save everyone a lot of headaches down the road.
Plus, if you’re on city water, each gallon that leaks costs you 8.5 cents—and that’s not including the cost of repairs or wasted time from having no water!
Efficient installation
Installing your own plumbing valves can be a time-consuming and difficult process. If you’re not familiar with the terminology or aren’t sure how to properly install them, then it’s best to leave it to the professionals.
Conclusion
So, what’s the best way to make sure that you get the right plumbing valve for your project? The most important thing is to do research. You can find plenty of resources online that will help you choose which type of valve is best for your needs, but it’s also good practice to talk directly with a plumber who has experience installing them. In addition to having a clear understanding of how plumbing valves work, they’ll also be able to answer any questions you might have about other parts of your plumbing system such as drains and faucets!
