Superior Under The Sink Water Filtration
80% Carbon | 20% Quantum Disinfection
What is Quantum Disinfection™?
Quantum Disinfection™ (QD) is a new technology that uses the quantum mechanic principles of electron movement to create catalytic active surfaces (positively charged) that can disintegrate any microorganism instantly, upon contact.
In more detail, QD refers to (1) a technology that allows the creation of (2) new composite materials with (3) particular disinfection capacities:
- The QD technology uses the general principals of the “Doping” technique, recently
discovered in the filed of advanced semiconductors, coupled with the high disinfection
proprieties of cationic Silver;
- The QD media represents alumina based ceramics (fig. & tab. here bellow) tuned with
one layer of titanium dioxide (called Acceptor Support) and another layer of silver (called
Active Phase). These two layers influence each other and create at the alumna surface a
strong cationic filed, + 1.4 eV (called Active Surface);
- The QD phenomenon is related to the disintegration of the microorganisms that touched
the Active Surface of the QD media. The strong cationic filed attracts and rips of the
electrons from the external membranes, enzymatic layers or DNA reproducible sequences of
any microorganism that get into a direct contact with the QD media.
Bacteria and Virus Removal Chart
|Microorganism (MO)||MO type||Best germicide|
|Pseudomonas aeruginosa||Bacteria||log 7||PIL, Proteus|
|Escherichia coli||Bacteria||log 7||EPA, Avazyme, Eurofine,
Ackuritlabs, GDCM, BFML
|Staphylococcus aureus||Bacteria||log 7||PIL, Proteus, BFML|
|Eterococcus hirae||Bacteria||log 10||Ackuritlabs, PIL, Proteus|
|Legionella adelaidensis||Bacteria||log 6||Proteus|
|Citrobacter sp||Bacteria||log 5||PIL|
|MS2||Virus||log 6||Avazyme, QFT Laboratory|
|Candida albicans||Yeast||log 5||Proteus|
|Anabaena constricta||Algae||log 5||Proteus|
How does Quantum Disinfection™ Work To Treat Bacteria and Viruses?
Obviously, the germicidal capacities of the QD media are acquired due to the presence of the silver at their surface. In the same time, besides the efforts of the scientists from all over the world, the action mechanism of silver against microorganisms remains is not entirely understood. Our hypothesis for our QD silver based product is the following:
The silver at the QD surfaces is in a high cationic state (1.4 eV). This electron discharge is achieved due to the presence of the TiO2 layer which, in the QD spacial spatial arrangement, size and bonding level, influence the Ag layer as follows: the big cation Ti4+ of the TiO2 (the layer called “Acceptor Support”), attracts closer to it the electrons from the silver above (Step 1, fig.). Due to the Ag high conductivity capacities, this effect migrates through the silver aggregates up til their surfaces. As a consequence, the surface of the QD media found itself in lack of electrons and acts just like a discharged active field powerful enough to ripoff the electrons (e-) from any microorganisms with which it comes into a direct contact (Step 2).
Moreover, once removed for the microorganisms (MO), the e- are instantly released in the water, without no influence on the electron discharged field at the surface of the QD media (Step 3). This catalytic behavior induce a permanent germicidal activity ensuring that no microorganism can stay alive once in contact with Quantum Disinfection™ media. As a conclusion, the QD electron discharged field causes the entire structure of the microorganisms to collapse at the quantum level, instantly, at contact. TPC measurements confirm the bacteria (E. coli) DNA is also instantly destroyed in this electron exchange. Any microorganism that touches the Quantum Disinfection™ media is ceases to exist completely.
Removes more than 99.9% of bacteria from the water.
Quantum Disinfection™ is:
– a NSF Certified Component to NSF/ANSI 42 for material requirements only (Certificate #: C0292640-01)
– tested by IAPMO to NSF/ANSI 61 (Certificate #: 23033)
– Certified MOH – China (Certificate #: 2015KF2513)
– Water volume: more than 15,000 gallons of use
– Contains high quality coconut shell GAC that reduces: sediment, Chlorine, odor and organics
– Water Flow Rate: 1 GPM